LUBRICANTS FOR PASSENGER AND COMMERCIAL VEHICLES
Oils intended for lubricating main and auxiliary trunk diesel engines of marine transport, fishing and river vessels. They can also be used to lubricate a number of marine mechanisms and units where oil of the appropriate viscosity is required (gearboxes, compressors, blowers, etc.). D-10Г2ЦС oil is used in the circulation systems of high-boost crosshead diesel engines. In addition, D-16Г2ЦС oil is used to lubricate the cylinders of trunk and crosshead diesel engines with the help of lubricators when the mass fraction of sulfur in the fuel used is no more than 1.5%. They are made on the basis of mineral base oils with the addition of an effective additive composition. Base oils of our own production and strict quality control guarantee a consistently high level of performance characteristics.
Kinematic viscosity at 100 °C, mm²/s
Method: GOST 33
D-10Г2ЦС:10.7
D-14Г2ЦС: 14.1
D-16Г2ЦС: 16.0
Viscosity index
Method: GOST 25371
D-10Г2ЦС: 94
D-14Г2ЦС: 92
D-16Г2ЦС: 93
Flash point in open cup, °C
Method: GOST 4333
D-10Г2ЦС: 235
D-14Г2ЦС: 252
D-16Г2ЦС: 253
Pour point, °C
Method: GOST 20287
D-10Г2ЦС: -17
D-14Г2ЦС: -15
D-16Г2ЦС: -15
Base number, mg KOH/g
Method: GOST 11362
D-10Г2ЦС:7.0
D-14Г2ЦС: 9.0
D-16Г2ЦС: 9.5
Sulfated ash content, %
Method: GOST 1461
D-10Г2ЦС: 1.3
D-14Г2ЦС: 1.2
D-16Г2ЦС: 1.4
They have good moisture resistance, allowing the oil to operate in constant contact with water.
High demulsifying properties ensure easy separation of water during separation and stable lubrication of engine parts. They have good detergent and dispersant properties even when using fuels with high sulfur content, ensuring maximum oil change intervals.
